Plexiglass (acrylic) case for sensor node

I got a laser cut plexiglass case made for WiSense node. The plexiglass sheet is around 2.75 mm thick. The node is sandwiched between two sheets (top and bottom). The sides are left open. The top sheet has cut outs for the antenna and the two 2×6 connectors. The bottom sheet has cut outs to expose the two 2×6 conectors. The idea is to provide some level of protection (including ESD) to the node. I am not entirely satisfied with the look.  I prefer curves to straight cuts. Hopefully I will get a better look in the next batch. The case is not cheap. We will make it optional.



Posted on November 6, 2014, in Uncategorized. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: